WalkingPad G1+ (Denise Austin 2.0) review

The WalkingPad Denise Austin 2.0 is the separate G1+ (G1 Plus) product page, not merely a finish option for the earlier G1 listing. It keeps the published 1–7.5 mph range and 240 lb limit, adds its own set of color SKUs and the same family’s folding-handrail/side-handle arrangement, and has a 47-by-17-inch running area in the technical table. The “2.0” label alone should not be treated as proof of a faster or higher-capacity machine.

Read the precise G1+ record instead of the shared marketing headline

The official U.S. page calls this the Denise Austin 2.0 and shows the model selector as G1+; the Shopify record is product 8621652476161, separate from the Denise Austin G1 product 8062724899073. The current G1+ record has six color SKUs. Powder Blue, Gray, Purple, Green and Pink were available when checked; Taupe was not. The product is therefore a separate assessed model with finish-only variants, not a reason to create six reviews or merge all Denise Austin pages into one identity.

Its useful performance facts are familiar: the technical section lists 1–7.5 mph, 240 lb maximum user weight, a 47-by-17-inch running surface, an 83.8 lb net machine and 94.8 lb gross package. The page’s marketing cards say 18.1 inches for the deck, so I use the more precise 17-inch technical-table width when a minimum usable belt measurement matters. It also advertises a 3 HP brushless motor and a 918 W rated-power figure; those are maker specifications, not measured continuous output or a promise of a long uninterrupted session. The G1+ does not provide the 300 lb margin of WalkingPad’s X25 family or the 330 lb posted limit of the MX8, and its 7.5 mph ceiling is short of a 10 mph running requirement.

Its compact classic fold does not establish vertical storage

The product page describes lifting the handrail for a run and folding the treadmill flat afterward. The manufacturer’s dimension diagrams label a 56.6-inch open length, 29.3-inch front width and 39.5-inch open height. The folded drawing gives a 38.7-inch length, 29.3-inch width and 7.6-inch thickness. The technical table lists the open tuple as 56.6 by 39.5 by 29.3 and the folded tuple as 7.6 by 38.7 by 29.3, which does not follow the same length-width-height order shown in the diagrams. To avoid a misleading footprint match, I use the model-specific diagrams to assign length and width and note the source ordering conflict. The folded cross-section is especially helpful if you are checking a low bed or sofa opening, but clearance for operating use is not provided.

WalkingPad says the G1+ arrives assembled and describes transport wheels, a folding handrail and folding side handles. The U.S. page presents flat storage and under-furniture visuals, but does not clearly approve upright storage; therefore a mandatory vertical-storage answer remains unconfirmed. A folding image is not a safe parking instruction. The U.S. manuals route returned 404 and the package list does not expose a downloadable exact G1+ manual, so its precise folding, clearance and maintenance instructions remain a delivered-unit check.

It is not a work pad just because the handles fold

KS Fit and the on-machine SpeedDial give it two listed ways to adjust speed; the page also lists an OLED display and a phone/tablet holder. The exact package list names the treadmill, power cord, safety key and wrench. It does not document a handheld remote, an adjustable worktop or an under-desk mode. The side handles and lifted handrail are described for balance during faster exercise; no lowered work setting, desk clearance or work-speed range is documented. If you require work calls while walking, or need an included adjustable station, a model with a clearly described tray/workstation such as the MX10 is a better question to investigate. The MX10’s tray dimensions and maximum desk-mode speed still need confirmation, but its manufacturer at least states a work-walking configuration.

Who should compare it?

Choose the G1+ for an upright home routine if the 240 lb limit, 1–7.5 mph range, flat-fold profile, handrail and available color variants fit. The G1 is the closest alternative: it shares the published speed and load ceiling and measures a technically stated 17.32-by-47.24-inch area versus G1+ at 17 by 47 inches. The differences are small in those listed measurements, not a clear performance upgrade. MX8 has a shorter belt and slower cap but a higher stated capacity and explicit upright storage; G5i offers a wider deck, 10 mph and powered incline at the cost of more width and a 150 lb machine. A request for a true desk mode, remote-only control, verified vertical storage or a known daily-hours limit should not match the G1+ on available documentation.

Source check: WalkingPad’s exact U.S. Denise Austin 2.0/G1+ page and six-variant record; its front, side and folded diagrams were inspected for the dimensions discussion. Availability and specifications were checked 2026-10-24.